STEEL SIDEBOARD
STEEL SIDEBOARD
$0.00
YEAR: 2001
DESCRIPTION:
A sophisticated sideboard with contrasting materials and a bridge design giving it great personality.
Particularly wide sideboard supported by two thin and precious sides in mirror polished steel. Featured by a lighting system, placed in a rear technical channel, it allows the light to come at the same time from the upper part, the lower part and inside the casings. A thick wooden back panel makes the unit a free standing sideboard. With flap doors, variously fitted inside with shelves and drawers.
FINISHINGS
Sideboards with flap doors, variously fitted inside with shelves and drawers. Side panels in stainless steel mirror polished. Technical back-end system with back-lighting and cable management. Interior finish matte white. In essence brown oak, lauro preto, Eucalyptus, Black Eucalyptus, or matte and glossy lacquered in 14 colors: Black, White, White SW, Ghiaia Grey, Pietra Grey, Fumo Grey, Lino, Sabbia, Warm Grey, Argilla, Red NY, Red Vico, Blue Iseo, Green Iseo.
MATERIALS
WOODEN FURNITURE: oak veneered wood particleboard panels. Open-pore, transparent matt acrylic varnish.
LACQUERED CABINET: panels of wood particles with glossy lacquer or with embossed polyurethane varnish.
SIDES: structural side made of wood particles panel reinforced with steel inserts and covered with polished stainless steel sheet.
TECHNICAL BAND AND DRAWERS FRONT: sandblasted methacrylate on two sides.
DRAWERS AND TRAYS: panels in wood particles with polyurethane paint embossed white.
SHELVES: sandblasted float glass protected with polyurethane paint.
CD / DVD HOLDER: Natural color anodized extruded aluminum.
MAINTENANCE NOTES
PARTS WITH A SHINY LACQUER FINISH: gently rub down with a damp chamois leather or similar (water + a little neutral soap).
STEEL PARTS: polish with a cloth dampened with water and immediately wipe with a dry cloth. Do not use brushes or sponges made of steel or scratchy materials.
ALUMINUM PARTS: gently rub down with a damp cloth (alcohol only).
WOODEN PARTS: gently rub down with a damp cloth (water only). Do not use alcohol or detergents.
METHACRYLATE PARTS: Rub smoothly with a dry dust-cloth. Use a damp cloth to remove fingerprints. Do not use alcohol or detergents.
GLASS PARTS: gently rub down with a damp cloth using any of the products currently available on the market for cleaning glass.
USE CAUTIONS
Important: before replacing the light bulbs, carefully read the technical data and instructions in the light pack. Only qualified professional electricians should service the electrical parts.
Do not use in an improper way. In particular, do not climb or sit on it or rest heavy objects on it or any item for which the product has not been specifically designed.
By: GABRIELE BURATTI, LODOVICO ACERBIS - Acerbis
DESCRIPTION:
A sophisticated sideboard with contrasting materials and a bridge design giving it great personality.
Particularly wide sideboard supported by two thin and precious sides in mirror polished steel. Featured by a lighting system, placed in a rear technical channel, it allows the light to come at the same time from the upper part, the lower part and inside the casings. A thick wooden back panel makes the unit a free standing sideboard. With flap doors, variously fitted inside with shelves and drawers.
FINISHINGS
Sideboards with flap doors, variously fitted inside with shelves and drawers. Side panels in stainless steel mirror polished. Technical back-end system with back-lighting and cable management. Interior finish matte white. In essence brown oak, lauro preto, Eucalyptus, Black Eucalyptus, or matte and glossy lacquered in 14 colors: Black, White, White SW, Ghiaia Grey, Pietra Grey, Fumo Grey, Lino, Sabbia, Warm Grey, Argilla, Red NY, Red Vico, Blue Iseo, Green Iseo.
MATERIALS
WOODEN FURNITURE: oak veneered wood particleboard panels. Open-pore, transparent matt acrylic varnish.
LACQUERED CABINET: panels of wood particles with glossy lacquer or with embossed polyurethane varnish.
SIDES: structural side made of wood particles panel reinforced with steel inserts and covered with polished stainless steel sheet.
TECHNICAL BAND AND DRAWERS FRONT: sandblasted methacrylate on two sides.
DRAWERS AND TRAYS: panels in wood particles with polyurethane paint embossed white.
SHELVES: sandblasted float glass protected with polyurethane paint.
CD / DVD HOLDER: Natural color anodized extruded aluminum.
MAINTENANCE NOTES
PARTS WITH A SHINY LACQUER FINISH: gently rub down with a damp chamois leather or similar (water + a little neutral soap).
STEEL PARTS: polish with a cloth dampened with water and immediately wipe with a dry cloth. Do not use brushes or sponges made of steel or scratchy materials.
ALUMINUM PARTS: gently rub down with a damp cloth (alcohol only).
WOODEN PARTS: gently rub down with a damp cloth (water only). Do not use alcohol or detergents.
METHACRYLATE PARTS: Rub smoothly with a dry dust-cloth. Use a damp cloth to remove fingerprints. Do not use alcohol or detergents.
GLASS PARTS: gently rub down with a damp cloth using any of the products currently available on the market for cleaning glass.
USE CAUTIONS
Important: before replacing the light bulbs, carefully read the technical data and instructions in the light pack. Only qualified professional electricians should service the electrical parts.
Do not use in an improper way. In particular, do not climb or sit on it or rest heavy objects on it or any item for which the product has not been specifically designed.
By: GABRIELE BURATTI, LODOVICO ACERBIS - Acerbis
Quantity:
